Fin and Furn
Slim Series LED fireplace wall mounted and built-in style fireplace with vent located at the bottom front
Regular price
$302.95
Description
Slim Series comes with new decorative edge glass design “ and a bottom-front mounted heat source LED FIREPLACE wall mounted and built-in style fireplace with vent located at the bottom front.
Description:
- New decorative edge to edge class design fireplaces.
- Botton-front mounted heat source
- Equipped with overheat protection device
- LED display and remote function for easy operation
- Integrated remote control and touch control pad
- Has 3 ember bed selections which plastic crystals, one piece log/stone consist
- Automatic overheating protection with timer of 1 hour increments up to 9 hours
- Two stage fan-forced air heater which you may use with the heater or without for ambiance
- Includes LED 9 colour flame, one colour cycle and one off status and the same applies to the side lighting
Installation:
- Please take out the foam that is inside the unit before using the heater
- Remove the glass panel first, set the fire box into the wall.
Secure the side trim pieces on the wall with screws.
Reinstall the glass panel onto the firebox with screws.
- Remove the outer glass around the bracket, mounting screws
- Remove the outer glass
- Take out the foam
- Install the outer glass to the appliance:
Lift glass panel and line up with the top bracket, fasten panel to the appliance.
Screw the brackets to appliance with mounting screws - Be cautious about the outer glass bracket screws
Glass Particles Installation
- To remove the outer glass around the bracket, undo the mounting screws
- Remove the outer glass
- Adjust the screws and carefully take out the log set
- Gently put the glass crystals into place
- Be cautious about the outer glass bracket screws
Show More
Specification/Information
| Model | OFP-36LED | OFP-42LED | OFP-50LED | OFP-60LED | OFP-72LED |
|---|---|
| Wattage | 1300W (High) / 650W (Low): Two levels of heating) |
| Voltage | 110-120V AC (plug-in) |
| Material | High quality log media and crystal media for fuel bed |
| Installation | Wall mounted and built-in |
| Timer | 1-9 hours |
| Control Mode | Touch Panel / Remote Control |
| Flame Colours | 10 colours (9 colours + cycle) |
| Flame Brightness | 1 level (Brightness cannot be adjusted) |
| Overheat Protection | Yes |
| Heating Area | 16-20m² |
Have a question?
We're here to help.
Share this Product
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.